On a new build, drywall is what turns a frame into rooms. It's also a stage where rushing or cutting corners shows up for years. Here's the sequence a quality crew follows.
1. Hanging the board
Sheets go up ceilings-first, then walls, fastened tight to the framing on a set screw pattern. Seams are staggered to reduce cracking, and the right board is used for the right place — moisture-resistant in wet areas, fire-rated where code requires it.
2. Taping and coating
Every joint and fastener is taped and then built up with multiple coats of joint compound, each one feathered wider than the last. This is the slow, skilled part — and where the eventual finish is won or lost.
3. Sanding
Once dry, joints are sanded flat and smooth. A good crew controls the dust and checks the work under raking light, because flaws that hide in flat light jump out the moment the sun hits.
4. Texture
Walls and ceilings are sprayed to the chosen texture — knockdown and orange peel being the Arizona standards — applied evenly so the whole home reads consistently.
5. The walkthrough
Before paint, the surface should be inspected together. Corners straight, seams invisible, texture uniform. That final check is what separates a builder-grade job from one that looks custom.
Whether it's a single addition or a whole-home build, that sequence — done patiently, by one crew — is what produces walls you stop noticing, in the best possible way.
Talk to David and the crew — free quotes across the Phoenix metro.